A beam of L meters span simply supported at end carries a central

A beam of L meters span simply supported at end carries a central load W. The overall depth of beam section is 300 mm with horizontal flanges each of 200 mm x 20 mm and a web of 260 mm x 10 mm. If the maximum shear stress is limited to 45 N/mm2 and maximum bending stress is limited to 150 N/mm2 , then the values of centrally applied load W and span L respectively are:
A beam of L meters span simply supported at end carries a central load W- The overall depth of beam section is 300 mm with horizontal flanges each of 200 mm x 20 mm and a web of 260 mm x 10 mm- If the maximum shear stress is limited to 45 N-mm2 and maximum bending stress is limited to 150 N-mm2 - then the values of centrally applied load W and span L respectively are

Timber Module2, PDF, Bending

Materials Dlubal Software, nmm2 values

Abaqus - Mises Stress values are too high - Student Engineer

Effects of the thickness of cross-laminated timber (CLT) panels

A beam of L meters span simply supported at end carries a central

Typical multi-span simply supported and multi-span continuous

Yield strength R_eL [N/mm²], nmm2 values

A simply supported beam of span (l) carries a point load (W) at

A timber beam is 100 mm wide and 150 mm deep. The beam is simply

A horizontal beam, simply supported at its ends, carries a load which varies uniformly from 15 kN/m at one end to 60 kN/m at the other. Estimate the central deflection and the

A prestressed concrete simply supported beam of span 6 m has a